Diferencias

Muestra las diferencias entre dos versiones de la página.

Enlace a la vista de comparación

Ambos lados, revisión anterior Revisión previa
Próxima revisión		 Revisión previa
doc:tec:net:router_openwrt:wr841n:instala [2025/04/28 08:19] – borrado - editor externo (Fecha desconocida) 127.0.0.1doc:tec:net:router_openwrt:wr841n:instala [2025/04/28 09:17] (actual) – ↷ Enlaces adaptados debido a una operación de mover 20.171.207.32
Línea 1: Línea 1:
 +====== TL-WR841N - OpenWRT ======
 +
 +<well>
 +{{ico:enlace.png?nolink|}} //Enlaces//
 +  * [[http://tombatossals.github.io/instalar-openwrt/|Instalar OpenWRT]]
 +  * [[https://wiki.openwrt.org/toh/tp-link/tl-wr841nd|OpenWrt TP-Link TL-WR841N y TL-WR841ND]]
 +  * [[http://www.soylopeor.com/archivo/tl-wr841n-v9-openwrt.html|TL-WR841N v9 con OpenWRT]]
 +  * [[https://wiki.openwrt.org/toh/tp-link/tl-wr702n|OpenWrt TP-Link TL-WR702N]]
 +  * [[http://tombatossals.github.io/openwrt-repetidor-wireless/|OpenWRT en modo repetidor wireless]]
 +</well>
 +===== Conexión serie =====
 +
 +  * For my TP-Link TL841N v9.0 i had to remove R26. It's a pull-up between RX (device side) and VCC. My ftdi device couldn't send data with R26 attached.
 +    * {{doc:tec:net:router_openwrt:wr841n:wr841nd-v9.0_serial.jpg?linkonly|Fotografía con el detalle}}.
 +  * U-Boot speed: 115200
 +  * kernel speed: 115200
 +  * Data format: always 8N1
 +
 +===== Installing via web interface =====
 +
 +{{youtube>vmTv3ONy8Og?medium}}{{youtube>syWg6_DvJ2I?medium}}{{youtube>CbPBSURnwFA?medium}}{{youtube>oNLss7btnP4?medium}}
 +
 +  * 1) Download image for your version.
 +  * 2) Log in to router web interface and select the firmware image you just uploaded as an update.
 +  * 3) Sit and wait while it flashes. It will reboot and be accessible at 192.168.1.1.
 +
 +The Barrier Breaker image already includes a GUI, you do not have to install it manually.
 +
 +:!: Note: Newest version of tp link firmware (tested on TL-WR841N_V9_150310 / 3.16.9) does not accept openwrt firmware filename, so you have to rename the downloaded openwrt firmware to something what looks like stock firmware prior flashing, i.e. wr841nv9_wr841ndv9_en_3_16_9_up(150310).bin for V9 - check the zip with original firmware on tp link website for correct file name scheme - I'd suggest to remove "boot" word from filename, because openwrt firmware does not contain boot loader.
 +
 +:!: Warning! in some cases after reboot you don't have web interface (GUI), only telnet and ssh access. You can install GUI, for details see: luci.essentials, but before install LuCI (GUI) you need to configure your router to have access to internet, for configuration see: internet.connection
 +
 +===== Primer análisis tras la instalación =====
 +
 +**Lo que tenía con ''dd-wrt'' y ahora no encuentro aquí:**
 +
 +  * Despertar Wake On LAN de equipos.
 +
 +  * Desactivar el botón WPS del router.
 +    * [[https://www.wifi-libre.com/topic-334-como-activar-y-configurar-el-servicio-wps-en-openwrt.html|Posible solución para activarlo?]]
 +  * Crear otras wifis para invitados, con diferentes SSID, contraseñas, etc.